Ultra High-clearance Links (FRONT)
Ultra High-clearance Links (FRONT)
These front links have been re-designed from the ground up to give you the most performance possible. Upgrading your stock links is one of the best upgrades you can do to get your SCX24 up and over more obstacles. With the release of these link sets, now you can upgrade your upgrades.
AE-designed suspension links aim to raise the standard in scale off-road performance via these improvement opportunities:
- laser-cut from Grade 5 Titanium or Brass
- higher-than-high clearance
- increased rigidity
- optimized caster (shorter upper links)
- options to adjust wheelbase length
- front-lower links are completely smooth leading into the skid
- smaller profile and narrower rod ends = more flex and less bind
- paired with official Treal Hobby hardware (stainless balls, hardware, o-rings included)
Material:
- 1.6mm (0.063") Laser-cut grade 5 titanium
- 1.6mm (0.063") Laser-cut brass
Note: This is a front set of links ONLY. To upgrade one vehicle, a set of rear links will need to be purchased separately.
Note: Fabrication is required by the consumer to separate the links. They can be twisted apart. The remaining knob can then be cut/sanded/filed smooth.
*The front-upper links have the bend closest to the skid plate. The front-lower links have the bend closest to the axle. See instructions under the "Documents" tab for more information. Links are packaged raw and carbon-infused metallic allows (chromoly) should be coated with a rust-inhibitor depending on location and use.