SCX24 Comp Knuckle Weight Hangers

3D Printed [PETG] and tunable knuckle weight hangers. WEIGHTS SOLD SEPARATELY.

Designed to fit just inside the 1.3" (33mm) SETAE Super Double Beadlock Wheels.  They have an indexing mark at 12 o'clock which can be used to better align the knuckle weights with a desired marker (i.e. upper kingpin knuckle screw). the holes are 4mm x 8mm and can be used with tungsten balls, stainless dowels or similar. Each knuckle would be able to hold a total of 14 tungsten balls, total of 28 for an additional 16g of weight where you want it most! Note that the 2mm wheel spacers that are included with the SETAE wheels will need to be used.

Simply apply a small dab of ShooGoo, E6000, CA Glue to the inside of the knuckle weight hanger. AE recommends ShooGoo, and be mindfull of the position of the weights when drying so that they don't inadvertently shift.

The ID of the weight hanger is 11.25mm but can be easily modified if needed.

Currently tested with the following knuckles (more added when confirmed):

SCX24 Meus Isokinetic Strait Axles

AE Recommended Weights:

4mm Tungsten Balls

4mm x 8mm Stainless Dowel Pins